Main

Eileen's pH and Ozone Pool Questions

We're building a house and setting up a new pool that is a fiberglass inground pool. It holds about 22,000 gal. Our water in a pool in the same general area seems always to have a rather high ph - I'd say 7.8 - 8.2. When the ph needs to be lowered it requires Muriatic Acid. If you use that to lower the ph then you're adding things that I understand should not be used with the copper. We also have a Prozone Ozonator to install when we set up the pool. which I think eliminates the need for large amounts of chlorine. So my question is will this work for us? Thanks, Eileen

Hello Eileen,
Thanks for visiting the blog. First let me answer your question about the compatibility of muriatic acid with our copper ionization system - there is no problem there. Since the pH of an ECOsmarte pool needs to stay between 6.8 and 7.2, you will need to use a pH reducer. Muriatic acid is the most common one, and although it is nasty stuff (it is an acid) and you must be careful using it, once you put it in the pool it adjusts the pH and does not leave any kind of toxic by-product that I am aware of. Muriatic acid is completely compatible with the ECOsmarte pool system. (Chlorine is not compatible - but that's another story.)

Another choice for pH adjustment is to use CO2 gas, which is the pH reduction mechanism used by our top of the line fully programmable pool system. CO2 gas is bubbled into the water for set amounts of time every day and keeps the pH where it needs to be - all fully automated. And CO2 gas is not as touchy to handle as acid, obviously.

As far as the Ozonator you mention - we do not recommend combining our system with any other - ECOsmarte eliminates the need for chlorine, bromine, and ozone. The oxidation produced in the ECOsmarte chamber will take care of your organic materials and the copper ions will be your residual; what stays in the water killing bad things. An ECOsmarte system will work fine for your pool - you do not need the ozone.

Typically, ozone pools need to run 24/7 because the oxidation is only temporary - there is no residual killing agent. That is why ozone pools are chlorine reduction pools - not chlorine free. As I mentioned above - chlorine is incompatible with an ECOsmarte pool...and you will be thrilled to swim in a truly chlorine-free pool - it is heaven!

Post a comment

(If you haven't left a comment here before, you may need to be approved by the site owner before your comment will appear. Until then, it won't appear on the entry. Thanks for waiting.)